Ramsond CT 520DY 3-in-1 Multifunction Digital Inverter Plasma Cutter + TIG Welder + ARC (MMA) Welder, Dual Voltage 110/220V Dual Frequency 50/60Hz

Ramsond CT 520DY 3-in-1 Multifunction Digital Inverter Plasma Cutter + TIG Welder + ARC (MMA) Welder, Dual Voltage 110/220V Dual Frequency 50/60Hz Review

Ramsond CT 520DY 3-in-1 Multifunction Digital Inverter Plasma Cutter + TIG Welder + ARC (MMA) Welder, Dual Voltage 110/220V Dual Frequency 50/60Hz Feature

• 50 Amp Digital Inverter Air Plasma Cutter
• 200 Amp Digital Inverter DC (Direct Current) TIG Welder
• 200 Amp Digital Inverter DC ARC (MMA) Welder
• Automatic Dual Voltage/Dual Frequency (110v220v 50/60 Hz)
• Integrated Digital Display of Current (Amps) & Pressure Gauge

Ramsond introduces the 4th generation of its CT520DY. CT520DY is a 3-in-1 multifunction cutting and welding machine. It is a 50 Amp plasma cutter, a 200 Amp DC (Direct Current) TIG welder and a 200 Amp ARC/MMA stick welder. It is dual voltage 110V/220V and dual frequency 50/60 Hz. It is equipped with DIGITAL AMP DISPLAY, INTEGRATED PRESSURE GAUGE, FOOT PEDAL FUNCTION and FOLDABLE INSULATED HANDLE. It uses the most reliable high frequency V-MOSFETs by TOSHIBA along with PWM (Pulse Width Modulation Processor) which help deliver a constant, concentrated and precise current to the cutting/welding surface. Regardless of your training, you can achieve smooth, clean and uniform cuts (1 inch) and weld a wide range of surfaces and material (e.g. stainless steel, carbon steel, alloy steel, copper, brass and other conductive material) with minimal heat input and without distortion of metal. CT520DY is easy to use by the do-it-yourself user, while fully accommodating of the demands of professional operators. It has five controls; the ON/OFF switch, Amperage Control Knob, the Post Flow Knob, Function Selector and the foot pedal ON/OFF switch. It has an integrated air pressure gauge in the front panel of the unit, as well as a large digital display that conveniently displays the current (Amps) setting of the unit. Note: This is a DC (Direct Current) TIG Machine. For aluminum welding AC (Alternating Current) is recommended. Each Ramsond CT520DY comes fully equipped with all accessories: TIG Torch, Plasma Torch, ARC/MMA Electrode Clamp, Air Regulator/Filter, Argon Flow Meter, Set of Consumables for the plasma and TIG torches, and Ground Clamp. Plug is not included. It comes with a 1 year Limited Warranty (Parts and Labor). The consumables are readily available both through Ramsond and third party sellers and are reasonably priced.

1/16" Eazy Strike Rod-6013

1/16" Eazy Strike Rod-6013 Review

1/16" Eazy Strike Rod-6013 Feature

• Made By Us Forge Part Number: 01302

For 110 volt welding machines. With Easy Strike igniter tip to help eliminate problems a less experienced welder might encounter while starting the arc. Easy to use for homeowners, handymen, and hobbyists. Can be positioned flat, horizontal, vertical oroverhead. Coated with titania potassium for AC, DCEP or DCEN current. 60 tensile strength.

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V Review

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V Feature

• 100 Amp 110 VAC Arc Welder
• Arc Welder
• 100 Amp Arc Welder
• Welder

Model and Color May Very Features: - Voltage: 110 Vlt - Frequency: 60 Hz - Required Current: 26 Amp - Single Phase - Amperage Control: 45 To 100 Amp - Welds Up To 1/4" Mild Steel - UL Listed - Up To 100% Duty Cycle Include: 1 Pc Welders Shield 1 Pc Stinger - Compact And Easy To Handle - Perfect For Home Projects And Maintanance

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder Review

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder Feature

• Arc stick welder powered by 115-volt current
• Welds mild or stainless steel from 18-gauge to 1/8 inch
• Dual heat setting for use with welding rods
• Automatically shuts off at duty cycle rating
• 5-year limited warranty

The Campbell Hausfeld WS0970 115-volt 70 Amp arc stick welder can weld mild or stainless steel from 18-gauge to 1/8-inch thick, and is ideal for use on boat trailers, wrought iron, or automotive sheet metal. It comes with a dual heat setting for use with welding rods, and its thermal overload protection automatically shuts off the welder at its duty cycle rating. A contoured face makes operating the arc welder easy, as do the carry handle and storage clips to hold the cables in place. The Campbell Hausfeld WS0970 welder is powered by a 115-volt current and generates 70 Amps of power. A built-in storage keeps accessories organized while cord management maintains secure storage. This welder includes a welding shield, hammer/brush, electrodes, and quick start guide. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What's in the Box
Welder, welding shield, hammer/brush, electrodes, and quick start guide.

ITW Consumer 47829 Flow-Mix Plastic Welder [Misc.] [Misc.] [Misc.] [Misc.]

ITW Consumer 47829 Flow-Mix Plastic Welder [Misc.] [Misc.] [Misc.] [Misc.] Review

ITW Consumer 47829 Flow-Mix Plastic Welder [Misc.] [Misc.] [Misc.] [Misc.] Feature

• "ITW CONSUMER" FLOW-MIX® PLASTIC WELDER
• 14 ml Syringe automatically mixes adhesive & activator during application
• Eliminates hand mixing, messy clean up, plus the difficulty of applying to your surface
• Includes 2 instant mix nozzles
• Made from space age Methacrylate technology

Flow Mix Plastic Welder, 14 ml Syringe Automatically Mixes Adhesive & Activator During Application, Eliminates Hand Mixing, Messy Clean Up, Plus The Difficulty Of Applying To Your Surface, Includes 2 Instant Mix Nozzles, Made From Space Age Methacrylate Technology, Stronger Than Epoxy, Bonds Plastic To Plastic, Plastic To Metal & Metals To Metals, Thick Formula Fills Gaps, Is High Impact, Water Resistant & Requires Minimal Surface Preparation, 3500 PSI, 15 Minute Set Time, Full Bond 24 Hours, OEM Approved, Carded.

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA)

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA) Review

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA) Feature

• Conductor Size 1=8/3 AWG, Cable Marking=STW, Length=50 ft, Color=Blue, Voltage=250.

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA)

Soapstone Marker for Welders & Textile Marking - Commando Gold Anodized Pro Series Holder with 5 Pierces of #1 Select Soapstone

Soapstone Marker for Welders & Textile Marking - Commando Gold Anodized Pro Series Holder with 5 Pierces of #1 Select Soapstone Review

Soapstone Marker for Welders & Textile Marking - Commando Gold Anodized Pro Series Holder with 5 Pierces of #1 Select Soapstone Feature

• Attractive pen size 3/8" diameter x 4-7/8" long anodized aluminum body with pocket clip
• Built-in chuck positions & firmly holds 1/4" diameter soapstone
• Made in USA with convent hole in top to remove broken soapstone
• Simply loosen chuck nut to remove and replace soapstone
• Limited Lifetime Warranty on USA Made handle - see warranty details

Handle has Non-Slip Finger Grip surface on body & chuck nut to aid in removing or replacing soapstone and for positive control during tool use. Holders accommodate 1/4" round soapstone up to 5" long. All machined parts are plated or made of materials to help prevent rust & corrosion. Handle Made in USA (Des.Pat.No. D416,777) >>> SUGGESTED USES: Textile marking, Marking for welding, Mark on many other materials without marring surface, Gifts or Imprint for advertising & promotions

Lincoln Electric Easy MIG 180 230V Flux Cored/MIG Welder - 180 Amp Output, Model# K2698-1

Lincoln Electric Easy MIG 180 230V Flux Cored/MIG Welder - 180 Amp Output, Model# K2698-1 Review

Lincoln Electric Easy MIG 180 230V Flux Cored/MIG Welder - 180 Amp Output, Model# K2698-1 Feature

• Can set up for gas-free flux core welding or gas-shielded MIG welding for steel, stainless and aluminum
• Includes welder, gun with 10-ft cable assembly, .025in. and .035in. contact tips, gasless and gas nozzles, spindle adapter for 8in.-dia. spools, shielding gas apparatus, 1lb. spool of .025in. MIG wire and 1/2-lb. spool of .035in. flux cored wire

The Lincoln Easy MIG 180 welder is an ideal choice for farm, light fabrication, auto or home projects. If you have access to industrial 208/230V power, you'll be able to weld up to 3/16in. for MIG welding or 1/2in. with gas-less flux core welding. Volts: 230, Amps: 180, Duty Cycle: 30% at 130 Amps, Mig Ready: Yes, Wire Feed Speed Control: 50-500 IPM, Weldable Metals: Steel, stainless steel and aluminum, Weld Thickness (in.): 1/2, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, when welding MIG, Welding Wire Diameter (in.): .025 to .045, Power Cord (ft.): 6, Cart: No, Dimensions L x W x H (in.): 18 5/8 x 10 1/8 x 14

Hobart 770187 Universal Cart for Portable Wire Feed Welders

Hobart 770187 Universal Cart for Portable Wire Feed Welders Review

Hobart 770187 Universal Cart for Portable Wire Feed Welders Feature

• Cylinder rack for Hobart welders
• Works with all Hobart Handler models
• Holds large or small cylinder
• Cylinders not included
• 36 by 13 by 8 inches; limited 1-year warranty

Fits Hobart Handler and many other medium-sized welders and cutters. Tire Size (in.): 8, Tire Type: 2 Wheels, 2 Swivel Casters

Clarke 180EN 220V Mig/ Fluxcore Gas/No Gas Welder KIT

Clarke 180EN 220V Mig/ Fluxcore Gas/No Gas Welder KIT Review

New Clarke 180EN 220V welder KIT which includes regulator kit, welding cart, welding gloves, and welding helmet This new in factory box Clarke 180EN mig/fluxcore 220V wire welder KIT is easily converted from fluxcore to gas welding and will weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this new in factory box Clarke 180EN welder along with new gas regulator kit, welding cart, welding gloves, welding helmet, roll of wire, chipping hammer/brush, welding mask, and manual as well. features: 6 power settings for maximum welding control Welds 1/4" in a single pass Tweco Torch Solid state electronic heat control with large PC board for better wire speed control. Weld steel, aluminum, stainless, copper and cast, requires correct wire and gas. Operates from standard 220 VAC. Automatic thermal safety switch prevents overload. Mig gun with full On / Off safety control. Mig Gun is non-live with built in gas shut off. Welds with or without gas Tough metal casing Fan Cooled. Simple to operate and portable. specifications: Max Amps: 180 Min Amps: 30 Heat Settings: Six Max Open-Circuit Voltage: 30 Variable wire feed control 0 - 700 IPM On / Off switch + / - Polarity control. Fan Cooled Thermal Safety Switch Wire sizes: .023 - .035 Circuit Breaker Req: 25 amps Input voltage: 220 VAC Phase: Single Duty Cycle: 20% at 100% output Duty Cycle: 30% at 85% output

Hobart 202808 Welding Cup Shield 27 Amp ICE-25C/27C/27T Non-Shielded

Hobart 202808 Welding Cup Shield 27 Amp ICE-25C/27C/27T Non-Shielded Review

 Miller # 20280825 AMP shield cup ICE-25C & ICE-27C for Spectrum 375 and 375 X-treme.  Replaces ICE-25C component 176658